Match the protocol to a fundamental approach for storing data. (Each option may be used once, more than once, or not at all.)

Solution:
NAS: c) Sharing files over industry standard protocols such as NFSv4 or SMB.
SAN: a) Block access using a FC protocol. or b) Block access using FCoE protocol or d) Block access using the iSCSI protocol.
According to the HPE website, NAS stands for Network Attached Storage and is a storage system that provides file-level access to data over a network. NAS devices use protocols such as NFSv4 or SMB to share files with clients. NAS devices typically have their own file system and operating system and can support multiple users and applications.
SAN stands for Storage Area Network and is a network that provides block-level access to data over a dedicated network. SAN devices use protocols such as FC, FCoE, or iSCSI to transfer blocks of data to servers. SAN devices do not have their own file system and rely on the servers to manage the data. SAN devices typically provide high performance and availability for mission-critical applications.

Does this meet the goal?

Correct Answer:A

You connect to the compute ops Management (COM) through the Green lake Cloud Platform dashboard. The server you want to manage is missing
Click where you can add the server so it appears in the CoM.

Solution:


Does this meet the goal?

Correct Answer:A

Match each HPE product With the customer requirements it meets.

Solution:
MSA 2062: A customer needs a low cost entry-level storage appliance with automatic tiering for their Fibre Channel environment
MSL2024: A hospital wants to store air-gapped copies of their medical imaging to protect against ransomware attacks and natural disasters
StoreEasy 1560: A small software development company needs a solution for their growing file shares in their Microsoft environment
StoreOnce VSA: Customer wants to backup and quickly recover their Hyper-V environment in a remote site with an option to backup to the cloud
This is because:
MSA 2062: This is a flash-enabled storage appliance that supports Fibre Channel, iSCSI and SAS connectivity. It offers automatic tiering that optimizes performance and cost by moving data between SSDs and HDDs based on usage patterns.
MSL2024: This is a tape library that supports up to 24 LTO tape cartridges and one or two tape drives. It provides offline data protection and long-term retention for compliance and disaster recovery purposes. It can also create air-gapped copies of data that are isolated from network threats such as ransomware.
StoreEasy 1560: This is a file storage appliance that supports SMB, NFS and FTP protocols. It is optimized for Microsoft environments and integrates with Active Directory, BitLocker encryption, Windows Storage Server and Windows Server Backup. It can scale up to 16 TB of internal capacity and 280 TB of external capacity.
StoreOnce VSA: This is a virtual storage appliance that provides backup and recovery for virtualized environments. It supports Hyper-V, VMware and KVM hypervisors and integrates with backup applications such as HPE Data Protector and Veeam. It can also deduplicate data and replicate it to
another StoreOnce system or to the cloud.

Does this meet the goal?

Correct Answer:A

Which combination of HPE solutions can provide data validation on MSL3040 andLTO-9 cartridges?

Correct Answer:B
Library and Tape Tools and HPF StoreEver TapeAssure Advanced Software: This combination is correct, as Library and Tape Tools (L&TT) is a diagnostic tool that allows you to perform firmware upgrades, run tests, and verify data on tape devices. HPE StoreEver TapeAssure Advanced Software is a software that provides data integrity, performance, health, and utilization reports for tape drives and cartridges, and it works with L&TT to perform data verification2 .

Match the RAID level to the number of drive failures an array can handle without losing data. (Each option may be used once, more than once, or not at all.)

Solution:
RAID 1: any single drive
RAID 1 ADM: any two drives
RAID 5: any single drive
RAID 6: any two drives
RAID 1: This is a level of RAID that uses mirroring to create an exact copy of data on two or more disks. It can tolerate the failure of any single drive without losing data, as long as the other drive is still functional.
RAID 1 ADM: This is a level of RAID that uses advanced data mirroring to create two copies of data on three disks. It can tolerate the failure of any two drives without losing data, as long as the third drive is still functional.
RAID 5: This is a level of RAID that uses striping with parity to distribute data and parity information across three or more disks. It can tolerate the failure of any single drive without losing data, as long as the other drives can reconstruct the data from the parity information.
RAID 6: This is a level of RAID that uses striping with double parity to distribute data and two sets of parity information across four or more disks. It can tolerate the failure of any two drives without losing data, as long as the other drives can reconstruct the data from the double parity information.

Does this meet the goal?

Correct Answer:A

Your customer wants to receive emails When a hardware event occurs on their HPE proLiant Gen10 server. Click where you can find the iLO management interface to set this option.

Solution:
To set the email notification option, you need to go to the “Administration” tab and select the “Management” option. Then you need to enter the email address and SMTP server information in the “AlertMail” section and enable the “AlertMail” feature. You can also specify which events you want to receive emails for by selecting the appropriate severity level.

Does this meet the goal?

Correct Answer:A